ECOSPRING HOT WATER HEAT PUMP - HP300(1920H X 650W)
RRP:
Description
Both with Advanced Controls
The advanced EcoSpring Hot Water Heat Pumps allows you to control your hot water requirements with an easy to use Control Panel.
Economy Mode
The unit utilises the heat pump to heat water. This is the most efficient model possible, thus allowing the greatest savings.
While the unit uses the heat pump as its primary means to heat the water, the standard electric elements will activate if the ambient air temperature is low. -7°C <T4< 12°C
Hybrid Mode
While the unit uses the heat pump as its primary means to heat the water, the standard electric elements will activate if the ambient air temperature is low. -7°C <T4< 12°C
e-Heater Mode
This mode shuts off the heat pump and only uses the electric elements to heat the water, just like a standard electric water heater. eHeat mode allows for operation in colder situations (less than -7°C) where the heat pump would not function ideally.
Download Product Specs
Frequently Asked Questions
How long will my order take
Once you place an order with us, if the item is in stock, we will dispatch any orders before 12pm same day. After 12PM the following day. Our couriers are usually overnight, however depending on the courier workload, it can take up to 5 working days.
Any Bigger items by Freight truck usually takes 1-4 working days North Island. 4-8 working days South Island.
What size waste do I need for my bath & basin?
Unless a plumber has speicified a different size,
Basin Wastes are 32MMBath wastes are 40MM
What colours do our custom pieces come in?
Our vanities are available in Melteca from NZ panels. Choose from the Bestwoods or Primepanels ranges. Are vanities are alos available in any Resene paint finish.
Our Stonetops can be made in any Smartstone or Uniquartz Colour.
What is the difference between a 12volt and 24volt heated rail and ladders?
What is Low Voltage?
According to the Australia and New Zealand Standards – Electrical Wiring Rules AS/NZS 3000:2018 low voltage is anything "Not exceeding 12 Volts AC or 30 Volts ripple-free DC".
What does “Wet Area Suitable” mean?
Products that are “Wet Area Suitable” have a suitable IP (Ingress Protection) rating that enables them to be installed in what is classified as Zone 1 in the bathroom. See Bathroom Zones
Bathroom Zones
The Australia and New Zealand Standard AS/NZS 3000:2018 identifies the zones in a bathroom and the IP rating required for electrical items installed in each zone. The illustration shown here is a guide only, for full details please refer to Australia and New Zealand Standard AS/NZS 3000:2018.